CCNA R&S (CCNA5.0) Cấu hình Cơ bản và định tuyến IPv4, IPv6 trong bài lab openlab1-s2new (Phần 1)
Đề Bài
(up hình ảnh sau)
Soạn mẫu trên notepad:
Cau hinh BR1
copy doan cau hinh paste vao router>
ena
conf t
hos BR1
enable secret cisco@sec
line con 0
pass cisco@sec
login
exit
access-list 10 permit 172.16.1.0 0.0.0.255
line vty 0 4
access-class 10 in
password cisco@telnet
login
exit
interface GigabitEthernet0/0
ip address 10.1.1.1 255.255.255.0
no shut
interface GigabitEthernet0/1
ip address 10.1.12.1 255.255.255.0
no shut
exit
router rip
version 2
network 10.0.0.0
no auto-summary
exit
exit
wr
Sauk hi paste:
Router>
Router>
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hos BR1
BR1(config)#enable secret cisco@sec
BR1(config)#line con 0
BR1(config-line)#pass cisco@sec
BR1(config-line)#login
BR1(config-line)#exit
BR1(config)#access-list 10 permit 172.16.1.0 0.0.0.255
BR1(config)#line vty 0 4
BR1(config-line)#access-class 10 in
BR1(config-line)#password cisco@telnet
BR1(config-line)#login
BR1(config-line)#exit
BR1(config)#interface GigabitEthernet0/0
BR1(config-if)#ip address 10.1.1.1 255.255.255.0
BR1(config-if)#no shut
BR1(config-if)#interface GigabitEthernet0/1
BR1(config-if)#ip address 10.1.12.1 255.255.255.0
BR1(config-if)#no shut
BR1(config-if)#exit
BR1(config)#router rip
BR1(config-router)#version 2
BR1(config-router)#network 10.0.0.0
BR1(config-router)#no auto-summary
%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
%LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to up
BR1(config-router)#
BR1(config-router)#
BR1(config-router)#exit
BR1(config)#exit
BR1#
%SYS-5-CONFIG_I: Configured from console by console
BR1#wr
BR1#
Cau hinh Gate2
Sau crack pass
ena
conf t
hos GATE2
enable secret cisco@sec
line con 0
pass cisco@sec
login
exit
access-list 10 permit 172.16.1.0 0.0.0.255
line vty 0 4
access-class 10 in
password cisco@telnet
login
exit
interface GigabitEthernet0/0
ip address 192.168.123.2 255.255.255.0
no shut
interface GigabitEthernet0/1
ip address 10.1.12.2 255.255.255.0
no shut
exit
router rip
version 2
network 10.0.0.0
no auto-summary
redistribute ospf 1 metric 2
exit
router ospf 1
router-id 2.2.2.2
redistribute rip metric 100 subnets
network 192.168.123.0 0.0.0.255 area 0
exit
exit
wr
Router>
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hos GATE2
GATE2(config)#enable secret cisco@sec
GATE2(config)#line con 0
GATE2(config-line)#pass cisco@sec
GATE2(config-line)#login
GATE2(config-line)#exit
GATE2(config)#access-list 10 permit 172.16.1.0 0.0.0.255
GATE2(config)#line vty 0 4
GATE2(config-line)#access-class 10 in
GATE2(config-line)#password cisco@telnet
GATE2(config-line)#login
GATE2(config-line)#exit
GATE2(config)#interface GigabitEthernet0/0
GATE2(config-if)#ip address 192.168.123.2 255.255.255.0
GATE2(config-if)#no shut
GATE2(config-if)#interface GigabitEthernet0/1
GATE2(config-if)#ip address 10.1.12.2 255.255.255.0
GATE2(config-if)#no shut
GATE2(config-if)#exit
GATE2(config)#router rip
GATE2(config-router)#version 2
GATE2(config-router)#network 10.0.0.0
GATE2(config-router)#no auto-summary
GATE2(config-router)#redistribute ospf 1 metric 2
GATE2(config-router)#exit
GATE2(config)#router ospf 1
GATE2(config-router)#router-id 2.2.2.2
GATE2(config-router)#redistribute rip metric 100 subnets
GATE2(config-router)#network 192.168.123.0 0.0.0.255 area 0
GATE2(config-router)#exit
GATE2(config)#exit
GATE2#wr
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4
Cấu hình BR2
ena
conf t
hos BR2
enable secret cisco@sec
line con 0
pass cisco@sec
login
exit
access-list 10 permit 172.16.1.0 0.0.0.255
line vty 0 4
access-class 10 in
password cisco@telnet
login
exit
interface GigabitEthernet0/0
ip address 10.2.2.2 255.255.255.0
no shut
interface GigabitEthernet0/1
ip address 10.2.13.2 255.255.255.0
no shut
exit
router eigrp 100
network 10.2.2.0 0.0.0.255
network 10.2.23.0 0.0.0.255
no auto-summary
exit
exit
wr
Router>
Router>
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hos BR2
BR2(config)#enable secret cisco@sec
BR2(config)#line con 0
BR2(config-line)#pass cisco@sec
BR2(config-line)#login
BR2(config-line)#exit
BR2(config)#access-list 10 permit 172.16.1.0 0.0.0.255
BR2(config)#line vty 0 4
BR2(config-line)#access-class 10 in
BR2(config-line)#password cisco@telnet
BR2(config-line)#login
BR2(config-line)#exit
BR2(config)#interface GigabitEthernet0/0
BR2(config-if)#ip address 10.2.2.2 255.255.255.0
BR2(config-if)#no shut
BR2(config-if)#interface GigabitEthernet0/1
BR2(config-if)#ip address 10.2.13.2 255.255.255.0
BR2(config-if)#no shut
BR2(config-if)#exit
BR2(config)#router eigrp 100
BR2(config-router)#network 10.2.2.0 0.0.0.255
BR2(config-router)#network 10.2.23.0 0.0.0.255
BR2(config-router)#no auto-summary
BR2(config-router)#exit
BR2(config)#exit
BR2#wr
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4
Cấu hình Gate3
ena
conf t
hos GATE3
enable secret cisco@sec
line con 0
pass cisco@sec
login
exit
access-list 10 permit 172.16.1.0 0.0.0.255
line vty 0 4
access-class 10 in
password cisco@telnet
login
exit
interface GigabitEthernet0/0
ip address 192.168.123.3 255.255.255.0
no shut
interface GigabitEthernet0/1
ip address 10.2.23.3 255.255.255.0
no shut
exit
router eigrp 100
network 10.2.23.0 0.0.0.255
no auto-summary
redistribute ospf 1 metric 10 10 10 10 10
exit
router ospf 1
router-id 3.3.3.3
redistribute eigrp 100 metric 200 metric-type 1 subnets
network 192.168.123.0 0.0.0.255 area 0
exit
exit
wr
Router>
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hos GATE3
GATE3(config)#enable secret cisco@sec
GATE3(config)#line con 0
GATE3(config-line)#pass cisco@sec
GATE3(config-line)#login
GATE3(config-line)#exit
GATE3(config)#access-list 10 permit 172.16.1.0 0.0.0.255
GATE3(config)#line vty 0 4
GATE3(config-line)#access-class 10 in
GATE3(config-line)#password cisco@telnet
GATE3(config-line)#login
GATE3(config-line)#exit
GATE3(config)#interface GigabitEthernet0/0
GATE3(config-if)#ip address 192.168.123.3 255.255.255.0
GATE3(config-if)#no shut
GATE3(config-if)#interface GigabitEthernet0/1
GATE3(config-if)#ip address 10.2.23.3 255.255.255.0
GATE3(config-if)#no shut
GATE3(config-if)#exit
GATE3(config)#router eigrp 100
GATE3(config-router)#network 10.2.23.0 0.0.0.255
GATE3(config-router)#no auto-summary
GATE3(config-router)#redistribute ospf 1 metric 10 10 10 10 10
GATE3(config-router)#exit
GATE3(config)#router ospf 1
GATE3(config-router)#router-id 3.3.3.3
GATE3(config-router)#redistribute eigrp 100 metric 200 metric-type 1 subnets
GATE3(config-router)#network 192.168.123.0 0.0.0.255 area 0
GATE3(config-router)#exit
GATE3(config)#exit
GATE3#wr
Nguồn: Trung tâm thiết bị viễn thông bách khoa